Servo Commander
The Servo Commander is a portable, handheld device, that generates the command signal required to drive servos and electronic speed controls (ESC) without the use of an R/C transmitter and R/C receiver. You can manually adjust the servo position, or the ESC speed, or continuously cycle between two slewing endpoints of your choice.
Downloads
Servo Commander M103
If you are interested in this or a similar project, please contact us.
Contact us
Servo Commander Features
- Allows interference-free servo checking when among groups using live R/C transmitters
- Tests servo travel, positioning, and throttle adjustment
- Checks for servo alignments, binding, damaged gear trains, or weak motors
- Enables mechanical adjustment of precise zero position
- Checks step response
- Permits first order frequency response
- Checks for vibration problems
- Facilitates mechanical break-in
- Performs endurance testing
- Input is protected against reversed voltage
- Convenience power to driven equipment fused at 1 A
- Accommodates either 1.0 or 1.5 ms zero signal
- Always powers-up producing a zero output signal
- Output signal is short circuit protected
- Allows normal or reversed positional control
- Has teach function to enter arbitrary slew endpoints
- Slew rate is variable from 0 to 100%
- Has quartz crystal controlled accuracy
- Type specific power cables are available
Servo Commander Technical Specifications
Size
3.4 x 3.4 x 2.0 in (86 x 86 x 51 mm)
Weight
4.5 oz (140 g)
Input Power
4.5 to 18 Vdc @ ~20 mA (reverse protected)
Output Level
4 to 5 V positive-going pulse limited to ~10 mA
Output Duration
1 to 2 MS
Output Precision
± 50 µs
Frame Rate / Frame Period
50 Hz / 20 ms
Contact Us AboutServo Commander
If you are interested in this, or a project similar to this, please contact us.
Contact us